Toàn bộ website
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc
Sản phẩm quốc tế
  • Mã sản phẩm: 1380646 (1,778 lượt xem)

Máy Phát Hsp 2.4G 3Ch Cho Tất Cả Xe Hơi Và Thuyền Rc

636,000đ
  • Màu sắc / Options
    One Size



Chat Zalo (0932715006)

MÔ TẢ SẢN PHẨM



Description: 
HSP 2.4G 3CH transmitter for all rc car and boat
Note:This product included small parts and pay attention to not to swallow it.
Suitable:All rc car and boat
All the products should be used by the aged above 6 years old.
Material:plastic
Transmitter size: heght:23.5cm  width:13cm
Receiver size: length:3.6cm
 
Feature:
The new MT-305 is an upgraded version of the MT-300. Not only does the appearance update beautiful, but the receiver also adds a waterproof silicone sleeve. In addition to the original steering stroke adjustment, the throttle stroke adjustment is newly added. The third channel switch, the remote control power supply low-voltage sound. Sound alarm and other functions. The built-in antenna no longer has to worry about breaking the antenna, and it is more user-friendly. New car remote control, without packaging (MT-305 and MT-300 receiving universal,but the FLysky transmitter is not suitable)

Using way:
MT-305 2.4g car / marine three-channel remote control Novel design Three channels Built-in antenna Out of control protection Simulator signal output.
MT-305 2.4g remote control transmitter and receiver pairing [pair frequency]
First turn on the power of the transmitter, press and hold the pairing/setting button on the receiver, then turn on the power of the receiver. At this time, the LED on the receiver starts to flash rapidly. Press the pairing button on the transmitter for 10 seconds. More than two seconds [the LED on the transmitter starts flashing rapidly] until the receiver's LED is not flashing.
 
MT-305 2.4g remote control Out of control protection setting method [FAIL-SAFE]
 
     The setting of FAIL-SAFE is only allowed in the state where the transmitter is connected to the receiver, and other functions are not performed in other states. When the transmitter is connected to the receiver [Receiver LED light is on] After cutting the position of CH1 CH3 to the position to be set, press and hold the pairing/setting button on the receiver for more than 2 seconds to enter the setting of FAIL-SAFE. Constant mode [LED slow flashing], then press and hold the button for more than 1 second in 5 seconds [more than 5 seconds or more without pressing the button to return to the normal mode without FAIL-SAFE setting] Save the set value At this time, the LED flashes rapidly and returns to the normal acceptance mode after completion. To cancel the function of FAIL-SAFE, just re-pair the transmitter and receiver.
 
The remote control requires an additional 4 AA alkaline or rechargeable batteries.
 
Package included:
1x transmitter
1x receiver


























THÔNG SỐ KỸ THUẬT & CHI TIẾT

Thông tin đang cập nhật


HỎI ĐÁP VỀ SẢN PHẨM

Lưu ý: Đối với sản phẩm quốc tế, thông tin và hình ảnh chi tiết chúng tôi đã liệt kê bên trên, có những sản phẩm nhân viên sẽ không tư vấn chi tiết được, mong quý khách vui lòng thông cảm. khi quý khách đặt hàng sẽ có nhân viên gọi điện lại xác nhận đơn hàng và thanh toán.

Chat Zalo (0932715006)

Vui lòng để đặt câu hỏi, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.


KHÁCH HÀNG ĐÁNH GIÁ (0 đánh giá)

Vui lòng để bình luận, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.

Hiện chưa có đánh giá cho sản phẩm, hãy trở thành người đánh giá đầu tiên.

SẢN PHẨM BẠN QUAN TÂM

LÊN ĐẦU TRANG